Preparing for Installation

Class 1 laser products are not considered hazardous. The HP ESCON PA has embedded Class 3a laser LED assemblies operating at a nominal wavelength of 850 nanometer and a maximum potential output power of 1.25 milliwatts. The design of the HP ESCON PA incorporates engineering features including current limiting, which ensures that there is no human access to LED radiation greater than Class 1 under any set of operating, maintenance, or service conditions, including a single fault.

There are fewer than 0.442 milliwatts propagating in the link or in any portion of the module. Therefore, according to IEC825-2:1993, Hazard Level 1 prevails in all parts of the system.

The LEDs are located on the front face of the module.

Laser Radiation

Warning Laser radiation is present when the system is open. Statement 1009

Waarschuwing Laserstraling is aanwezig wanneer het systeem open is.

Varoitus Lasersäteitä järjestelmän ollessa avoinna.

Attention Production d'un rayonnement laser en position ouverte.

Warnung Laserstrahlung in geöffnetem Zustand.

Avvertenza Emissione di radiazioni laser quando il sistema è aperto.

Advarsel Laserstråling er til stede når enheten er åpen.

Aviso Radiação laser presente quando aberto.

¡Advertencia! Radiación láser presente cuando el sistema está abierto.

Varning! Laserstrålning pågår när enheten är öppen.

PA-4C-E 1-Port High-Performance ESCON Channel Port Adapter Installation and Configuration

 

OL-3743-02

19

 

 

 

Page 19
Image 19
Cisco Systems PA-4C-E 1 manual Laser Radiation