Cisco Systems SLM248G4PS, SLM224G4PS manual Setup Time, Set Time, Local Time, Daylight Saving

Chapter 5 Configuration Using the Web-based Utility

System Location  This is used to enter a description of where the Switch is physically located, such as 3rd Floor.

System Contact  Enter the name of the administrator responsible for the system.

System Object ID  This is used for SNMP purposes and is set to 1.3.6.1.4.1.3955.6.5.224(248).2.

Base MAC Address  Displays the Switch’s physical address.

IP Configuration

Management VLAN  This drop-down menu allows you to select the Management VLAN. The default value is 1.

WARNING: If the system IP address (IP Address field) is set to 192.168.1.254, then keep the default values for the Management VLAN field (default value: 1), and the Default Gateway field (default value: 0.0.0.0). These fields must remain set to the default values. Otherwise, you may not be able to access the system.

IP Address Mode  Specifies whether the Switch’s IP address is Static or dynamically assigned using DHCP (Dynamic Host Configuration Protocol). Selecting Static allows you to enter a static IP address, subnet mask and default gateway using the text field provided. The default setting is Static.

IP Address  If you are using a static IP address, enter the IP address here. The Switch’s default IP address is 192.168.1.254.

Subnet Mask  If you are using a static IP address, enter the subnet mask for the currently configured IP address. The default subnet mask is 255.255.255.0.

Default Gateway  If you are using a static IP address, enter the IP address of the default gateway. The default value is 0.0.0.0.

DNS Server  If you are using a static IP address, enter the IP address of the DNS server. A second DNS address can be specified in the additional text field provided.

Click Save Settings to save your changes. Click Cancel Changes to cancel your changes.

Setup > Time

The Time screen allows you to configure the time settings for the Switch.

Setup > Time

Set Time

Use System Time  Select this option to use the system date and time.

Use SNTPTime  Select this option to use a Simple Network Time Protocol (SNTP) server to set the date and time.

Local Time

Here you set the system date and time for the Switch. All settings noted as“two-digit”must contain a leading zero if the value is less than 10 (for example, 01 instead of 1).

Hours  Enter the two-digit hour here. Minutes  Enter the two-digit minutes here. Seconds  Enter the two-digit seconds here. Month  Enter the two-digit month here. Day  Enter the two-digit day here.

Year  Enter the last two digits of the year here (for example, 07 instead of 2007).

Time Zone  Select your time zone from the drop-down menu. Time zones are identified by the difference between Greenwich Mean Time (GMT) and local time.

Daylight Saving

This is where you configure Daylight Saving Time.

Daylight Saving  To enable daylight saving time, check the box, then select either USA or European to use US or European daylight saving time, respectively. To use a different type of daylight saving time, select Custom, then customize the following settings:

•Time Set Offset  Enter the time difference in minutes for daylight saving time. The default is 60 minutes.

•From  Enter the starting date for daylight saving time using the format DD/MM/YY.

•To  Enter the ending date for daylight saving time using the format DD/MM/YY.

24/48-Port 10/100 + 4-Port Gigabit Smart Switch with Resilient Clustering Technology and PoE 19