Chapter 5 | Configuration Using the |
not displayed). You use this table to edit or delete existing user names and/or passwords, as described below.
Create a new user name
Make sure no entry is selected in the Local Users Table. If one is selected, click Cancel. Enter the new user name in the User Name field, and the password in the Password and Confirm Password fields. Then click Add to List to add a new entry to the Local Users Table.
Change a password
Highlight the associated user name in the Local Users Table. The User Name, Password, and Confirm Password fields will then be populated for editing. Enter the new password in the Password field, then enter it again in the Confirm Password Field. Then click Update to save the changes to the Local Users Table.
Change a user name
Highlight the user name in the Local Users Table. The User Name, Password, and Confirm Password fields will then be populated for editing. Modify the user name in the User Name field, then click Update to update the entry in the Local Users Table.
Delete a user name
Select the user name from the table, then click Delete.
If you accidentally select the wrong entry in the table, click Cancel to unselect the highlighted user name.
Click Save Settings to save the changes, or Cancel Changes to cancel the changes.
Admin > Static Address
Admin > Static Address
The Static Address screen lets you assign a static address to a specific Switch interface. A static address is bound to its assigned interface and cannot be moved. If a static address is seen on an interface to which it is not assigned, the address is ignored and is not written to the address table.
A list of all static addresses on the Switch appears at the bottom of the screen. The top part of the screen contains the following fields for creating static address entries:
Interface The interface that is associated with the static address. Select Port or LAG, then select the desired interface from the accompanying
MAC Address This is the physical address that is being mapped to the specified interface.
VLAN ID The VLAN ID number
VLAN Name The name of the VLAN associated with the specified interface. If you use this field, the VLAN ID field is disabled.
Status The static address type. The possible values are::
•Permanent (Default) Keep the entry permanently.
•Delete on Reset Delete the entry when the Switch is reset.
•Delete on Timeout Delete the entry when a timeout occurs. The default timeout period is 300 seconds.
•Secure The entry is defined for locked ports.
After you have entered the information listed above, click Add to List. The static address will then appear in the list of static addresses. To delete a static MAC address from the list, select the entry in the list, then click Delete.
Admin > Dynamic Address
Admin > Dynamic Address
The Dynamic Address screen lets you query the Dynamic Address Table to find specific dynamic MAC addresses, or display MAC addresses associated with a specific interface or VLAN. Query criteria include interface type, MAC address, VLAN, and table sort key. You can also set the Dynamic MAC Address Table’s address aging parameter or clear the table.
44 |
