Http | Cisco Systems SLM248G4PS, SLM224G4PS guide

Chapter 4

Configuration Using the Console Interface

IP Address Settings

The IP Address Settings screen allows you to set the IP information for the Switch.

IP Address Configuration

IP Address This sets the Switch’s IP Address. The default setting is 192.168.1.254. If you change the IP address, verify that the address you enter is correct and does not conflict with another device on the network.

Subnet Mask This combined with the IP Address defines the Switch’s network address.

Default Gateway This defines the IP Address for the default gateway of the network.

Management VLAN This is the ID number of the Management VLAN.

DHCP Client The status of the DHCP client is displayed. If you want the Switch to be a DHCP client, then select ENABLE. If you want to assign an static IP address to the Switch, then enter the IP settings and select DISABLE.

HTTP

The HTTP screen allows you to set the Hyper Text Transfer Protocol server (web server) information for the Switch.

HTTP

HTTP Server Enable or disable the Switch’s HTTP server function.

HTTP Server port Set the TCP port that HTTP packets are sent and received from.

Network Configuration

The Network Configuration screen offers a choice of two tests, Ping and TraceRoute.

Network Configuration

Ping The Ping screen displays the IP address of the location you want to contact.

Ping

Select Edit to change the IP address, and select Execute to begin the ping test.

After the ping test is complete, the Ping screen displays the IP address, status, and statistics of the ping test.

TraceRoute The TraceRoute screen displays the IP address of the address whose route you want to trace.

TraceRoute

Select Edit to change the IP address, and select Execute to begin the traceroute test.

24/48-Port 10/100 + 4-Port Gigabit Smart Switch with Resilient Clustering Technology and PoE

13

Image 19

Cisco Systems SLM248G4PS, SLM224G4PS manual Http

Contents

Port or 48-Port 10/100 + Online Resources About This GuideAbout This Guide Icon Descriptions Table of Contents Snmp Global Parameters Snmp Views Snmp Group Profile Snmp Gigabit Ethernet Fiber Optic Cabling Appendix B About Switch Stacking Appendix G Contact Information Appendix C Glossary Appendix D Specifications Introduction Chapter Front Panel Switch LEDs and ports are located on the front panelChapter Product Overview Product Overview Switch’s LEDs and ports are located on the front panel Power The Power port is where you connect the AC powerBack Panel Product Overview Placement Options Chapter InstallationInstallation Pre-Installation Considerations Desktop Placement Hardware InstallationRack-Mount Placement Configuring Stack Mode Uplinking the SwitchTo set up a stack with six switches, follow these steps Connect port G1 on Unit 2 to port G2 on Unit Power off the new unit 5 the former master unitConnect port G1 on Unit 3 to port G2 on Unit Using telnet Chapter Configuration Using Console InterfaceLogin screen appears. Proceed to the Login section below System Configuration Menu How to Use the Console InterfaceLogin Switch Main Menu System Information Management Settings Security Settings User & Password SettingsIP Configuration Http File Management Restore System Default SettingsReboot System Stack Configuration Port Status Menu Port Configuration Logout System ModePoE Settings Help Device Information Chapter Configuration Using Web-based UtilitySetup Setup Summary Clicking on a port displays the Port Configuration screen Setup ZoomSetup Network Settings Orange The administrator has closed down this port Daylight Saving Setup TimeSet Time Local Time Sntp Servers Setup Stack ManagementPort Management Port Settings Port Management Port Management Port Settings Port Configuration Port Management Link Aggregation LAG Configuration Port Management Lacp Port Management PoE Power Settings Vlan Table Vlan Management Port SettingVlan Management Vlan Management Create Vlan Vlan Management Vlan to Port Vlan Management Port to VlanJoin Vlan to Port Statistics Rmon Statistics StatisticsStatistics Rmon History Log Table Rmon HistoryRmon History Table Add Alarm Statistics Rmon AlarmsAlarm Table Statistics Port Utilization Statistics Rmon EventsStatistics Interface Statistics Parameters Security 802.1x SettingsSecurity Ethernet-like Security Port Security Setting Timer Security Storm Control Security Management Access List Security Radius QoSBroadcast Only Counts only Broadcast traffic CoS Default QoS CoS SettingsQoS Queue Settings CoS Settings QoS Basic Mode QoS Dscp SettingsQoS Bandwidth Spanning Tree Global STP Global SettingSpanning Tree Spanning Tree STP Status Bridge Settings Spanning Tree STP Port SettingsSpeed Displays the speed at which the port is operating Multicast Bridge Multicast Vlan Igmp SettingsMulticast Multicast Igmp Snooping Snmp Global Parameters Multicast Bridge Multicast Forward All Snmp Group Profile Snmp Views Snmp Communities Snmp Group MembershipUser Name Provides a user-defined local user list Advanced Table Snmp Notification FilterSnmp Notification Recipient Base Table Local User Edit AdminAdmin User Authentication User Authentication Admin Dynamic Address Admin Static AddressSecure The entry is defined for locked ports Clear Table If selected, this clears the MAC Address table Admin Port MirroringAdmin Cable Test Query Admin Save Configuration Admin Reboot Admin Firmware UpgradeAdmin Factory Default Admin Server Logs Admin LoggingAdmin Memory Logs Logout Admin Flash Logs Fiber Optic Cabling Appendix aAppendix a About Gigabit Ethernet Fiber Optic Cabling Gigabit Ethernet Stack Building Quick Start Appendix B About Switch StackingAbout Switch Stacking Appendix B Unit ID Allocation Advanced StackingStack Resiliency Unit IDs Master Discovery Stack Units Startup ProcessMaster Election Replacing a Failed Stack Member in a Running Stack Unit and Port ConfigurationUser Controls Stacking Examples Stack Master Failure and Replacement Splitting a Stack Subgroup Contains Both Master Unit and Backup Master Unit Both Stacks Kept Running During Insertion Merging Two Stacks Inserting Too Many Units Stacking Cable Failure Appendix C Glossary Appendix CGlossary Glossary Mail protocol on the Internet Packet a unit of data sent over a network Appendix C Specifications Appendix D SpecificationsAppendix D Management Vlan Class of Service Port-based 802.1p Vlan priority-basedPower in compliance with Ieee Dimensions Exclusions and Limitations Warranty InformationObtaining Warranty Service Appendix E Technical Support Warranty Information Regulatory Information Appendix F Regulatory Information Appendix F Norsk Norwegian Miljøinformasjon for kunder i EU Appendix F Contact Information Appendix G