Chapter 4 | Configuration Using the Console Interface |
After the traceroute test is complete, the TraceRoute screen displays the IP address, status, and statistics of the traceroute test.
File Management
The File Management screen allows you to upload or download files, such as the startup configuration, boot, or image file, using a TFTP server.
File Management
Source File Specify the location of the file to transfer. Select one of the following:
•TFTP If the file is located on a TFTP server.
•Image If the file is a software code file.
•
Destination File Specify where the file is to be transferred. Select one of the following:
•TFTP If the file is to be uploaded to a TFTP server.
•Image If the file is to be downloaded as a software code file.
•
•Boot If the file is a boot file.
File Name Enter the name of the file to be uploaded or downloaded.
IP Address Enter the IP address of the TFTP server that will transfer the file.
Select Edit to change the settings. When your changes are complete, press Esc to return to the Action menu, and select Execute to upload or download the designated file. If you are downloading a new boot image, please follow these steps:
1.Download the new boot code. DO NOT RESET THE DEVICE!
2.Download the new software image.
3.Reset the device now.
Restore System Default Settings
To restore the Switch back to the factory default settings, select Restore System Default Settings and press Enter. A prompt appears in the lower part of the screen asking you to confirm the requested action. Press Y to continue or N to cancel the action.
Restore Default
Reboot System
If you want to restart the Switch, select Reboot System and press Enter. When you are prompted to confirm the action, press Y to continue or N to cancel the action.
Reboot System
Stack Configuration
The Stack Configuration screen displays information about the switch stack and allows you to change those settings.
Stack Configuration
14 |
