Monitoring the VMPS
Youcan display information about the VMPS by using the show vmps privileged EXEC command. The
switchdisplays this informationabout the VMPS:
•VMPSVQP Version—The version of VQP used to communicate with the VMPS. The switch queries
theVMPS that is using VQP Version 1.
•ReconfirmInterval—The number of minutes the switch waits before reconfirming the
VLAN-to-MAC-addressassignments.
•ServerRetry Count—The number of times VQP resends a query to the VMPS. If no response is received
afterthis many tries, the switch starts to query the secondary VMPS.
•VMPSdomain server—The IP address of the configured VLAN membership policy servers. The switch
sendsqueries to theone markedcurrent. The one marked primary is the primary server.
•VMPSAction—The resultof themost recentreconfirmation attempt. A reconfirmationattempt can
occurautomatically when the reconfirmation interval expires, or you can force it by entering the vmps
reconfirmprivileged EXEC command or its Network Assistant or SNMP equivalent.
Thisis anexample of output for the show vmps privileged EXEC command:
Switch# show vmps
VQP Client Status:
--------------------
VMPS VQP Version: 1
Reconfirm Interval: 60 min
Server Retry Count: 3
VMPS domain server: 172.20.128.86 (primary, current)
172.20.128.87
Reconfirmation status
---------------------
VMPS Action: other
Configuration Example for VMPSExample: VMPS Configuration
Thisnetwork has a VMPS server switchand VMPS clientswitches with dynamic-access ports with this
configuration:
•TheVMPS server and the VMPS client are separate switches.
•TheCatalyst 6500 seriesSwitch Ais theprimary VMPSserver.
•TheCatalyst 6500 series Switch C and Switch J are secondary VMPS servers.
•Endstations are connected to theclients, Switch B and SwitchI.
•Thedatabase configuration file is stored on the TFTP server with the IP address 172.20.22.7.
Catalyst 2960-XR Switch VLAN Configuration Guide, Cisco IOS Release 15.0(2)EX1
OL-29440-01 117
Configuring VMPS
Monitoring the VMPS