DETAILED STEPS
PurposeCommand or Action
Entersthe global configurationmode.configureterminal
Example:
Switch# configure terminal
Step 1
Changesthe retry count. The retry range is 1 to 10; the default
is3.
vmpsretry count
Example:
Switch(config)# vmps retry 5
Step 2
Toreturn the switch to its default setting, use the no
vmpsretry global configuration command.
Note
Returnsto privileged EXEC mode.end
Example:
Switch(config)# end
Step 3
Verifiesyour entry in the Server Retry Count field of the
display.
showvmps
Example:
Switch# show vmps
Step 4
(Optional)Saves your entriesin theconfiguration file.copyrunning-config startup-config
Example:
Switch# copy running-config startup-config
Step 5
Troubleshooting Dynamic-Access Port VLAN Membership
Problem The VMPS shuts down a dynamic-access port under these conditions:
•Problem TheVMPS is in secure mode, and it does not allow the host to connect to the port. The VMPS
shutsdown theport to preventthe host from connectingto the network.
•Problem More than 20 active hosts resideon a dynamic-access port.
Solution Toreenable a disabled dynamic-access port, enter the shutdown interface configuration command
followedby the no shutdown interfaceconfiguration command.
Catalyst 2960-XR Switch VLAN Configuration Guide, Cisco IOS Release 15.0(2)EX1
116 OL-29440-01
Configuring VMPS
Troubleshooting Dynamic-Access Port VLAN Membership