PurposeCommand or Action
Returnsto privileged EXEC mode. The VLANinformation on the
switchis updated.
end
Example:
Switch(config)# end
Step 8
(Optional)Verifies that the domain name is the same as in Step 1
andthat theconfiguration revision number is0.
showvtp status
Example:
Switch# show vtp status
Step 9
Related Topics
VTPDomain, on page14
Monitoring VTP
Thissection describes commands used todisplay andmonitor the VTPconfiguration.
Youmonitor VTP by displaying VTP configuration information: the domain name, the current VTP revision,
andthe number of VLANs. You can also display statistics about the advertisements sent and received by the
switch.
Table 6: VTP Monitoring Commands
PurposeCommand
Displayscounters about VTPmessages that have been
sentand received.
showvtp counters
Displaysinformation about all VTPversion 3devices in
thedomain. Conflictsare VTP version3 deviceswith
conflictingprimary servers. Theshow vtp devices
commanddoes not displayinformation when theswitch
isin transparent or off mode.
showvtp devices[conflict]
DisplaysVTP statusand configuration for allinterfaces
orthe specifiedinterface.
showvtp interface[interface-id]
Displaysthe VTP password. The form of thepassword
displayeddepends on whether or not the hidden keyword
wasentered and ifencryption is enabledon theswitch.
showvtp password
Displaysthe VTP switchconfiguration information.showvtp status
Catalyst 2960-XR Switch VLAN Configuration Guide, Cisco IOS Release 15.0(2)EX1
34 OL-29440-01
Configuring VTP
Monitoring VTP