PurposeCommand or Action
Exitsfrom VLANconfiguration mode, andreturns to global
configurationmode.
exit
Example:
Switch(config-vlan)# exit
Step 8
Specifiesthe interface ID for the routed port that you shut down in
Step4, and enters interface configuration mode.
interfaceinterface-id
Example:
Switch(config)# interface
Step 9
gigabitethernet1/0/3
Reenablesthe routed port. It will be assigned a new internal VLAN
ID.
noshutdown
Example:
Switch(config)# no shutdown
Step 10
Returnsto privileged EXEC mode.end
Example:
Switch(config)# end
Step 11
Savesyour entriesin theswitch startupconfiguration file. To save
anextended-range VLAN configuration,you needto savethe VTP
copyrunning-config startup config
Example:
Switch# copy running-config
Step 12
transparentmode configuration and the extended-range VLAN
configurationin the switchstartup configuration file. Otherwise,if
theswitch resets, it will default to VTP server mode, and the
extended-rangeVLAN IDs willnot be saved.
startup-config
Thisstep is not required for VTP version 3 because VLANs
aresaved in the VLAN database.
Note
Monitoring VLANs
Table 9: Privileged EXEC show Commands
PurposeCommand
Displayscharacteristics for all interfaces or for the
specifiedVLAN configured onthe switch.
showinterfaces [vlan vlan-id]
Catalyst 2960-XR Switch VLAN Configuration Guide, Cisco IOS Release 15.0(2)EX1
56 OL-29440-01
Configuring VLANs
Monitoring VLANs