DETAILED STEPS
PurposeCommand or Action
Entersthe global configurationmode.configureterminal
Example:
Switch# configure terminal
Step 1
Entersthe IP address of theswitch acting as the primary
VMPSserver.
vmpsserver ipaddress primary
Example:
Switch(config)# vmps server 10.1.2.3 primary
Step 2
(Optional)Enters the IP address of the switch acting as a
secondaryVMPS server.
vmpsserver ipaddress
Example:
Switch(config)# vmps server 10.3.4.5
Step 3
Youcan enter up to three secondary server addresses.
Returnsto privileged EXEC mode.end
Example:
Switch(config)# end
Step 4
Verifiesyour entries in the VMPS Domain Server field of
thedisplay.
showvmps
Example:
Switch# show vmps
Step 5
(Optional)Saves your entriesin theconfiguration file.copyrunning-config startup-config
Example:
Switch# copy running-config startup-config
Step 6
Configuring Dynamic-Access Ports on VMPS Clients
Dynamic-accessport VLAN membership is for end stations or hubs connected to end stations. Connecting
dynamic-accessports to otherswitches cancause aloss ofconnectivity.
Caution
Catalyst 2960-XR Switch VLAN Configuration Guide, Cisco IOS Release 15.0(2)EX1
OL-29440-01 111
Configuring VMPS
Configuring Dynamic-Access Ports on VMPS Clients