Cisco Systems X3000, X2000 manual Specifications, Environmental

Linksys X2000/X3000 Specifications

Specifications

X2000

Standards	WLAN: 802..11n, 802..11g, 802..11b
	Ethernet: 802..3, 802..3u, 802..3ab
	ADSL: T1..413i2, G..992..1 (G..DMT), G..992..2
	(G..Lite), G..992..3 (ADSL2), G..992..5 (ADSL2+)
	for Annex A, B, M, L, U-R2 for Annex B
Ports	DSL, Cable, Ethernet (1-3), Power
Buttons	On/Off, Reset, Wi-Fi Protected Setup™
LEDs	Power, Ethernet (1-3), Wi-Fi Protected Setup,
	Wireless, Internet
Cabling Type	CAT5, RJ-11 (for Annex A), RJ-45 (for Annex B)
Antennas	2 Internal
Modulations	802..11b: CCK/QPSK, BPSK
	802..11g: OFDM/BPSK, QPSK, 16-QAM, 64-QAM
	802..11n: OFDM/BPSK, QPSK, 16-QAM, 64-QAM
Transmit Power	802..11b: 16 ± 1,5 dBm
	802..11g: 16 ± 1,5 dBm
	802..11n: 18 ± 1,5 dBm
Receive Sensitivity	802..11b: -87 dBm (typical) @ 11 Mbps
	802..11g: -72 dBm (typical) @ 54 Mbps
	802..11n HT20: -71 dBm (typical) @ MCS15
	802..11n HT40: -68 dBm (typical) @ MCS15
Security Features	WPA2™/WPA™ Personal and Enterprise;
	128, 64 bits WEP; MAC Address Filtering;
	SPI Firewall
OS Requirements	Windows 7, Windows Vista, Windows Vista
(for Setup wizard)	64-bit edition, or Windows XP
	Mac OS X 10..5 or higher

Environmental

Dimensions	202 x 34 x 160 mm (8,0” x 1,3” x 6,3”)
Weight	287 g (10,1 oz)
Power	12VDC, 1A
Certification	FCC, CE, Telepermit, K..21, UL, CB,
	Wi-Fi (802..11b/g/n), WPA™, WPA2™, WMM,
	Wi-Fi Protected Setup™
Operating Temperature	0 to 40°C (32 to 104°F)
Storage Temperature	-20 to 70°C (-4 to 158°F)
Operating Humidity	10 to 85% Noncondensing
Storage Humidity	5 to 90% Noncondensing

NoteS

For regulatory, warranty, and safety information, see the CD that came with your modem router or go to Linksys.com/support..

Specifications are subject to change without notice..

Maximum performance derived from IEEE Standard 802..11 specifications.. Actual performance can vary, including lower wireless network capacity, data throughput rate, range and coverage.. Performance depends on many factors, conditions and variables, including distance from the access point, volume of network traffic, building materials and construction, operating system used, mix of wireless products used, interference and other adverse conditions..

27