Cisco Systems X3000, X2000 manual Wireless Basic Wireless Settings, Manual setup, Wireless settings

Linksys X2000/X3000

L2TP

Layer 2 Tunneling Protocol (L2TP) is a service that generally applies to connections in Israel..

Telstra Cable

Telstra Cable is a service that generally applies to connections in Australia..

Network Setup

The Network Setup section configures the IP settings for your local network..

Wireless > Basic Wireless Settings

Note

To learn more about any field, click Help on the right side of the screen..

The basic settings for wireless networking are set on this screen..

There are two ways to configure the Router’s wireless network(s), manual and Wi-Fi Protected Setup..

Wi-Fi Protected Setup is a feature that makes it easy to set up your wireless network.. If you have client devices, such as wireless adapters, that support Wi- Fi Protected Setup, then you can use Wi-Fi Protected Setup..

Configuration View  To manually configure your wireless networks, select Manual..

Advanced Configuration

Manual setup

Set up the wireless network on this screen..

Note

After you set up the wireless network(s), set up the wireless security settings.. Go to “Wireless > Wireless Security” on page 19..

Network Mode  In most network configurations, you should leave it set to Mixed (default)..

Wireless settings

Basic Wireless Settings (Manual) > Wireless Settings

Network Mode  Select the wireless standards your network will support..

•• Mixed  If you have Wireless-N, Wireless-G, and Wireless-B devices in your network, keep the default, Mixed..

•• Wireless-B/G Only  If you have both Wireless-B and Wireless-G devices in your network, select Wireless-B/G Only..

•• Wireless-B Only  If you have only Wireless-B devices, select Wireless-B Only..

•• Wireless-G Only  If you have only Wireless-G devices, select Wireless-G Only..

17