Cisco Systems X2000, X3000 manual Wep

Linksys X2000/X3000

RADIUS Server  Enter the IP address of the RADIUS server..

RADIUS Port  Enter the port number of the RADIUS server.. The default is 1812.. Shared Key  Enter the key shared between the router and the server..

WEP

WEP is a basic encryption method, which is not as secure as WPA..

Note

If you select WEP as your Security Mode, each device in your wireless network MUST use WEP and the same encryption and shared key..

Encryption  Select a level of WEP encryption, (40/64-bit 10 hex digits) or 104/128-bit (26 hex digits).. The default is 40/64-bit (10 hex digits)..

Passphrase  Enter a passphrase to automatically generate WEP keys.. Then click Generate..

Key 1-4 If you did not enter a passphrase, enter the WEP key(s) manually.. TX Key  Select a default TX (Transmit) Key to use.. The default is 1..

Advanced Configuration

RADIUS

This option features WEP used in coordination with a RADIUS server.. (This should only be used when a RADIUS server is connected to the router..)

Note

If you select RADIUS as your Security Mode, each device in your wireless network MUST use RADIUS and the same encryption and shared key..

RADIUS Server  Enter the IP address of the RADIUS server..

RADIUS Port  Enter the port number of the RADIUS server.. The default is 1812.. Shared Secret  Enter the key shared between the router and the server..

Encryption  Select a level of WEP encryption, (40/64-bit 10 hex digits) or 104/128-bit (26 hex digits).. The default is 40/64-bit (10 hex digits)..

Passphrase  Enter a passphrase to automatically generate WEP keys.. Then click Generate..

Key 1-4 If you did not enter a passphrase, enter the WEP key(s) manually.. TX Key  Select a default TX (Transmit) Key to use.. The default is 1..

22