Linksys X2000/X3000

Wi-Fi Protected Setup Button  Use this method if your client device has a Wi-Fi Protected Setup button..

Note

Make sure you configure one client device at a time..

a.Click or press the Wi-Fi Protected Setup button on the client device..

b.Click the Wi‑Fi Protected Setup button on the router’s Wi-Fi Protected Setup screen, OR press and hold the Wi-Fi Protected Setup button on the back panel of the router for one second..

c.After the client device has been configured, click OK on the router’s Wi-Fi Protected Setup screen within two minutes..

Enter Client Device PIN on Router  Use this method if your client device has a Wi-Fi Protected Setup PIN (Personal Identification Number)..

a.Enter the PIN from the client device in the field on the router’s Wi-Fi Protected Setup screen..

b.Click the Register button on the router’s Wi-Fi Protected Setup screen..

c.After the client device has been configured, click OK on the router’s Wi-Fi Protected Setup screen within two minutes..

Advanced Configuration

Enter Router PIN on Client Device  Use this method if your client device asks for the router’s PIN..

a.On the client device, enter the PIN listed on the router’s Wi-Fi Protected Setup screen.. (It is also listed on the bottom of the router..)

b.After the client device has been configured, click OK on the router’s Wi-Fi Protected Setup screen within two minutes..

For each wireless network, the Network Name (SSID), Security, and Passphrase are displayed at the bottom of the screen..

Note

If you have client devices that do not support Wi-Fi Protected Setup, note the wireless settings, and then manually configure those client devices..

Wireless > Wireless Security

The wireless security settings configure the security of your wireless network(s).. The router supports the following wireless security options: WPA2/WPA Mixed Mode, WPA2 Personal, WPA Personal, WPA2/WPA Enterprise Mixed Mode, WPA2 Enterprise, WPA Enterprise, WEP, and RADIUS.. (WPA stands for Wi-Fi Protected Access.. WEP stands for Wireless Equivalent Privacy.. RADIUS stands for Remote Authentication Dial-In User Service..)

Note

To learn more about any field, click Help on the right side of the screen..

19

Page 19
Image 19
Cisco Systems X3000, X2000 manual Wireless Wireless Security