Chapter 6 Configuring Your Printer Using the Menus
Chapter 6
Configuring Your Printer Using the Menus
This chapter explains all the possible menu options for configuring the barcode printer. Refer to Chapter 5 for information on the operation of the menus system and which keys perform which actions.
6.1 The Group Menu
The printer has two modes of operation: Ready mode and Menu mode. To switch between the
modes, press the
key. The Group Menu is the first level of menus after entering the Menu Mode from Ready Mode. Each of the subsequent sections explains the individual menu options.
Ready Mode
READY
MODE
Menu Mode
MODE
| * Page | SELECT | |
|
|
| |
| Setup |
|
|
DOWN | MENU | or | UP |
|
|
| |
| * System | SELECT | |
| Setup |
|
|
| MENU | or | UP |
DOWN |
|
|
|
| * After | SELECT | |
|
|
| |
| MENU | or | UP |
DOWN |
|
|
|
| * Inter- | SELECT | |
| face |
|
|
| MENU | or | UP |
DOWN |
|
|
|
| * Save | SELECT | |
| Settings |
|
|
| MENU | or | UP |
DOWN |
|
|
|
| * Test | SELECT | |
| Mode |
|
|
DOWN | MENU | or | UP |
Set print attributes such as print speed, print darkness, printing method and page format. See Section 6.2
Set label detection method, sensing level, buzzer, time/date etc. See Section 6.3
Set what action the printer performs after printing a label, e.g. tear off, cut or peeling. See Section 6.4
Set up interface parameters for
Save changes to printer’s configuration permanently in memory. See Section 6.6
Produce a configuration printout, test sample or perform a head error check. See Section 6.7
- 41 -
