Chapter 2 Safety Precautions

CAUTION

Avoid high-humidity areas

Do not put the printer in areas with high-humidity or heavy condensation. If moisture has condensed on the printer, turn off the power switch immediately and leave the printer for a while until the moisture dries up. Using the printer when damp may result in electrical shock.

Carrying

Before carrying the printer, be sure to remove the plug from the outlet and the connecting cable to the outer equipment. If left connected, the power cord and connecting cable may be damaged, leading to fire and electrical shock.

Do not transport the printer while loaded with media. If media is loaded, it may drop out, leading to injury.

When placing the printer on a floor or desk, be careful not to catch your fingers and hands under the feet of the printer.

Power

Never operate the power switch or insert/remove the power or data cord with wet fingers. Failure to observe this precaution may result in electrical shock.

Power cord

Do not put a heater near the power cord. A nearby heater can melt the power cord casing, resulting in fire or electrical shock.

When removing the plug of the power cord from the outlet, be sure to grip the plug, not the cord, when pulling it out. Pulling the cord may expose the core or break the wire, leading to fire or electrical shock.

- 6 -

Page 15
Image 15
Citizen Systems CLP-8301 user manual Avoid high-humidity areas