Chapter 6 Configuring Your Printer Using the Menus
6.4 After Print Menu
The After Print Menu allows you to configure what the printer does once the label has been printed, including whether the printer feeds to the tear position after a batch of labels, whether the printer cuts the labels.
*After Print
Tear
Mode
Paper Position
Tear | Tear |
On/Off | On/Off |
When Tear Mode is Off
Inch mode |
|
Position | Position |
0.00IN | 2.00IN |
Metric mode
Position | Position |
0.0mm | 50.8mm |
When Tear Mode is On
Inch mode |
|
|
Position | Position | Position |
- 1.00IN | 0.00IN | 1.00IN |
Metric mode
Position | Position | Position |
- 25.4mm | 0.0mm | 25.4mm |
Key |
|
Range | Toggle |
Note: Menu Item on LCD with bold line is default.
- 45 -
