Citizen Systems iDP-460 user manual Us, So, Si

iDP-460 User’s Manual

RS	ALL
[Name]	Set Double Width Character
[Code]	<1E>H
[Function]	This command prints its subsequent characters in double width. When there
	is only one character worth of position in a line, it will be printed in normal
	width. This attribute remains valid until the US command(normal width
	mode) or CAN command is received.
	In the P-200 mode, this attribute is reset to normal width at the beginning of
	each line, every time the line is fed.
[See Also]	US, SO, SI

US	ALL
[Name]	Set Normal Width Mode
[Code]	<1F>H
[Function]	This command resets the double width character attribute and prints in
	normal width. The print data received after this command is printed as
	normal width characters.
[See Also]	RS, SO, SI

SO	ALL
[Name]	Set Double Width Character or Specify High Page
[Code]	<0E>H

49 CITIZEN