Citizen Systems iDP-460 Connecting Interface Cable, Connecting Drawer Kick-Out Connector

iDP-460 User’s Manual

4.2Connecting Interface Cable

(1)Turn off the power. (Mating side included)

(2)Check the top and bottom of the cable terminals, and connect to the interface connector.

(3)Fix the cable terminals.

•Serial interface: Tighten screws, to fix.

•Parallel interface: Turn a stopper, to fix.

•Mini DIN interface: Insert until locked.

(4) Connect the cable to a computer.

4.3Connecting Drawer Kick-Out Connector

(1)Turn off the power.

(2)Check the top and bottom of the drawer kick-out cable connector, and connect it to the drawer kick-out connector located on the back of the printer.

(3)Screw the grounding cable of the drawer to the grounding terminal of the printer.

CAUTION : Connect only the prescribed drawer (solenoid) to the drawer kick-out connector.

21 CITIZEN