Citizen Systems iDP-460 user manual ESC h n

iDP-460 User’s Manual

[Caution]	Be sure to add ";"(<3B>H) to the end of the parameter. This command is
	ignored in other than the P-250 mode and the P-900 mode.
[Initial Value]	The characters are printed after the LF command is received in the
	42-columns mode.
[Sample Program]	When setting the right margin to 10
	ESC e 10 ; → LPRINT CHR$(&H1B)+”e10;”;
	<1B>H<65>H<31>H<30>H<3B>H
[See Also]	SO, SI, RS, US

ESC h (n) ;	ALL
[Name]	Select Character Set
[Code]	<1B>H<68H>(n)<3B>H
[Domain]	0 ≤ (n) ≤10 (<30>H ≤ n ≤<39>H)
[Function]	This command selects the character sets of the countries listed below,
	depending on the n-value.

n	Function
0	U.S.A.
1	France
2	Germany
3	U.K.
4	Denmark I
5	Sweden

n	Function
6	Italy
7	Spain
8	Japan
9	Norway
10	Denmark II

[Caution]	Be sure to add ";"(<3B>H) to the end of the parameter. As shown separately,
	the character sets replace part of characters. If the n-value is specified
	beyond the limits, this command will be ignored.
[Initial Value]	n = 0

54 CITIZEN