Citizen Systems iDP-460 user manual Print Control Functions, Command List

iDP-460 User’s Manual

10.PRINT CONTROL FUNCTIONS

10.1Command List

Command	Function	Code	P200	P250	Refer to
LF	Line Feed	0AH	O	O	32
FF	Eject Paper	0CH	O	O	32
CAN	Clear Print Buffer and Cancel	18H	O	O	33
	Character Attribute
NULL	Pad character (NOP)	00H	O	O	33
DC2	Specify Red print	12H	O	O	33
FS	Execute P-250 Mode	1CH	O	X	34
GS	Execute P-200 Mode	1DH	X	O	34
RS	Set Double Width Character	1EH	O	O	35
US	Set Normal Width Mode	1FH	O	O	35
SO	Set Double Width Character, or	0EH	O	O	35
	Specify High Page
SI	Normal Width Mode or Reset	0FH	O	O	36
	Character Code
BELL	Drawer Kickout(D-type only)	07H	O	O	37
ESC a(n);	Set Line Height	1BH6H1(n)3BH	O	O	37
ESC b(n);	Eject Paper by n-lines	1BH62H(n)3BH	O	O	38
ESC c	Initialize	1BH63H	O	O	38
ESC d	Request Printer Status	1BH64H	X	O	39
ESC e(n);	Set Right Margin	1BH65H(n)3BH	X	O	39
ESC h(n);	Select Character Set	1BH68H(n)3BH	O	O	40
ESC i	Identify Printer	1BH69H	X	O	41
ESC x	Select P-900R Mode	1BH78H	O	O	41

* P250 represents both P-250 and P-900R modes.

P-250 mode basically equals to P-900R except the printer ID and some status sent to the host from the printer. Refer to the attached “Detail of Commands”.

*P200 represents the P-200 mode.

*O: Command enable, X: Command disable

*(n) in the command indicates the character code 30ch to 39ch.

*n m in the code indicates the character codes 00h to FFh.

43 CITIZEN