Citizen Systems BD2-2220, CT-S310, PMU2XXX - page 189

CT-S4000
• a=213： When the flow control of virtual COM is specified.
• a = 116: When kind of paper is specified
Setting Status Sending Data Setting Status Sending Data
Stored
Value
Stored
Value Print Control 1st Byte 2nd Byte 3rd Byte 4th Byte 5th Byte Flow control 1st By te 2nd Byte 3rd Byte 4th Byte 5th Byte
1 PC setting 49(“1”) ― ― ― ―
Single-color
paper
1 49(“1”) ― ― ― ― 2 DTR/DSR 50(“2”) ― ― ― ―
3 XON/XOF 51(“3”) ― ― ― ―
2 2-color paper 50(“2”) ― ― ― ―
• a=214： When Kanji is specified
• a = 201: When ACK output position is specified
Setting Status Sending Data
Setting Status Sending Data
Stored
Value
Stored
Value
ACK Output
Position 1st Byte 2nd Byte 3rd Byte 4th Byte 5th Byte Kanji 1st Byte 2nd Byte 3rd Byte 4th Byte 5th Byte
1 ON 49(“1”) ― ― ― ―
1 ACK-in-Busy 49(“1”) ― ― ― ―
2 OFF 50(“2”) ― ― ― ―
2 ACK-while-Busy 50(“2”) ― ― ― ―
3 ACK-after-Busy 51(“3”) ― ― ― ―
• a = 202: Input buffer full Busy output/cancel timing
Setting Status Sending Data
Stored
Value
BUSY
Output/Cancel 1st Byte 2nd Byte 3rd Byte 4th Byte 5th Byte
1 49(“1”) ― ― ― ―
2 50(“2”) ― ― ― ―
3 51(“3”) ― ― ― ―
4 52(“4”)
• a=212： Wen DMA (Direct Memory Access) control of serial communication is
specified
Setting Status Sending Data
Stored
Value DMA control 1st Byte 2nd Byte 3rd Byte 4th Byte 5th Byte
1 Valid 49(“1”) ― ― ― ―
2 Invalid 50(“2”) ― ― ― ―
- 189 -