- 204 -
GS ( M pL pH fn m
CT-S280 CT-S300 CT-S2000 CT-S4000 BD2-2220 CT-S310
support model PMU2XXX
[Function] Customizing the printer
[Outline] [The specification which depend on the model]
Executes processing related to escape/recovery of the value set in the work area or the data defined
by various kinds of command.
fn Function
Function 1 Copies the set value stored in work area to the storage area.
Function 2 Copies the set value stored in storage area to the work area.
Specifies the auto loading function of the set value at initialization to be valid or
invalid.
Function 3
• Work area:
Area where data is initialized by power OFF of resetting (initialize). Operation is made in
accordance with the data set in this area.
• Storage area:
Area where data is not initialized by power OFF or resetting (initialize).
Commands for this function
Command Type Command
ESC c3、GS a
Status relations
Macro registration GS :
ESC M、ESC R、ESC t
Character type
ESC !、ESC –、ESC E、ESC G、ESC V、ESC ｛、GS !、GS B
Font attribute GS b、GS （ N*
Line feed amount, character
space ESC SP、ESC 2、ESC 3
GS H、GS f、GS h、GS w
Barcode
2-dimensional code（★） GS ( k<fn65～70>
ESC D、ESC T、ESC a、GS L、GS W
Print position
FS !、FS &、FS ( A、FS –、FS . 、FS C、FS S、FS W
Kanji control relations
ESC c 4、ESC c 5、GS ( D、GS ( H <fn49>、 GS P
Other
★ … Supported with CT-S2000 and CT-S4000 label models.
* … Not supported with BD2-2220.