- 280 -
●MSW2-4： Full Columns print
[Outline] Select the processing if print data closes to the end of line or the right of print width.
OFF(0) ON(1)
Full Col print Line Feed Wait Data
ON (1) OPERATION:
If printer receives data/command exceeding the full column, printer further waits for print data.
If data exceeding the full column is a command, printer operates following the command.
OFF (0) OPERATION:
If printer receives data/command exceeding the full column, it automatically prints data in buffer
followed by a line-feed.
<Example>
If the first data after exceeding the full column is a control code such as<ESC !>;
If OFF (0) is set, print data within buffer and put a line feed, or
If ON (1) is set, print no data within buffer and further wait for print data.
●MSW2-5： Cover close return
[Outline] Select the operating taken after printer cover is opened during printing, paper is refilled with
no-paper （PE） is detected, then cover is closed to restart printing.
OFF(0) ON(1)
Resume aft PE Next Top
ON (1) OPERATION:
Restart printing from the heading of remaining data.
During printing image, bar code, vertically-doubled character or page mode, if cover open or PE is
detected, then after return, restart printing from heading of the remaining data.
OFF (0) OPERATION:
Print data continued from the previous printing. During printing, if cover open or PE is detected,
then after return, restart printing data immediately after an error data.
*With BD2-2220, Cover Close corresponds to Head Down (Platen Close) and Cover Open
to Head Up (Platen Open).