- 95 -

2.2.8 Paper Detecting Commands

ESC c 3 n
CT-S280 CT-S300 CT-S2000 CT-S4000 BD2-2220 CT-S310
support model PMU2XXX
[Function] Selecting the Paper Sensor valid for a Paper-end signal output
[Code] <1B>H<63>H<33>H<n>
[Range] 0≦n≦255
[Outline] [The specification which is common to the model]
This command selects by which Paper Sensor a Paper-end signal should be output. Each bit for “n”
has the following meaning:
Value
Bit Position 0 1
0 Paper Near-end Disabled Enabled
1 Paper Near-end Disabled Enabled
2 Paper-end Disabled Enabled
3 Paper-end Disabled Enabled
4 Undefined — —
5 Undefined — —
6 Undefined — —
7 Undefined — —
[Caution] This command is valid only for the parallel interface.
[Default] n=15