Clarion 310C owner manual Changing Timeouts, To change a timeout, Manual, Comments/Illustrations

Changing Timeouts

A timeout is the length of time that Auto PC waits for input before returning to its previous state. You can set the timeouts for key presses, speech command wakeup, and menus.

To change a timeout	Manual !	Comments/Illustrations
	Press Start, then to	Select the Setup program.
	highlight Setup, then

to select Timeouts Select Timeouts program. and

to select Hold keys Determines how long a key must be pressed for, and to choose a and held to take effect. Example of use:

timepress and hold a number key to set a radio preset.

Each timeout is explained on the following page.

Clarion AutoPC Owner’s Manual

136