Clarion 310C owner manual Opening the DCP

Precautions continued

Opening the DCP

Grip the control panel as shown in the illustration which follows, and pull it outward and downward in one continuous motion.

Closing the DCP

Place your index finger immediately below the Start button, pressing inward and upward as shown below.

Proper clearance to eject CD

Open the control panel to the lowest position to allow the CD to be ejected without causing damage.

Before pressing the eject button, look to see that the CD will clear the top of the control panel as illustrated below.

Correct clearance

Note: If the CD is not manually removed within approximately 10 seconds after the eject button is pressed, the CD will be automatically loaded back into the CD Player.

CD ROM Installation

The vehicle should be parked at a level location when a higher version of OS or CD ROM software is installed. Note: If a vehicle starts up or cranks up, or if the ACC (accessory) is turned on or off during the installation, voltage fluctuation harmful to this unit may occur. This could result in an abnormal installation or a malfunction in the unit.

Power On at time of initial operation

It may take up to 15 seconds to see an actual display on the unit when it is initially powered up. This is not a malfunction.

Clarion AutoPC Owner’s Manual v