Clarion 310C owner manual Troubleshooting, Infrared transfer between Windows CE-baseddevices

How to avoid problems with infrared data transfer

Troubleshooting

If you encounter difficulties while using your system, look here.

Infrared transfer between Windows CE-based devices

If you are unable to use infrared to transfer information between Windows CE-based devices, try the following.

1.Transfer only one file, or no more than 25 contact cards, at a time.

2.Position the infrared ports so that they face each other (available range is ten degrees up, down, right, and left). Allowable distance apart ranges from a minimum of 2 inches to a maximum of 2 feet (60 centimeters). Make sure nothing is between the two infrared ports.

3.Different Handheld PCs and Palm-size PCs transfer data at different speeds. If they are, go to Setup, select Infrared, and change the speed of the IR transfer.

4.If you can receive data on the AutoPC but not transmit data, or vice versa, you may need to set the AutoPC to different IR transfer speeds for sending and receiving.

5.Adjust the interior lighting. Some types of light interfere with infrared communication. Try turning off some lights.

Clarion AutoPC Owner’s Manual 151