Clarion DXZ958RMC SYSTEM CHECK function, Turning on, Turning off, CODEMATIC function, Basic Operations, Selecting a mode, Adjusting the volume, Turning ON/OFF the power

Basic Operations

English

Selecting a speaker system

When this product is turned on for the first time, it allows you to select a speaker system. Choose your system in “SPEAKER SELECT” screen by following the procedure below.

1.Touch the speaker system best suited to your car.

SPEAKER SELECT

3 WAY 2 WAY Dolby NORMAL

PL

2. Touch [OK] to confirm your selection.

3 WAY ?

OKCANCEL

SYSTEM CHECK function

If you change your speaker system while the power of this unit is on, perform the SYSTEM CHECK function to display the SPEAKER SELECT screen and select the appropriate speaker system again. For details, see page 51.

CAUTION

Select the speaker system suited to your speaker configuration. Failing to do so can damage your speakers.

Turning ON/OFF the power

Turning on

Note:

•Be careful when using this unit for a long time without running the engine. If you drain the car’s battery too far, you may not be able to start the engine and this can reduce the service life of the battery.

1.Press the [ROTARY] knob.

The mode that was previously active is displayed.

Turning off

1. Press the [ROTARY] knob.

CODEMATIC function

When “CODEMATIC” is set to “ON”, and the power is turned ON with the DCP attached, the Touch Code display appears. Touch the display in the order that was set in the adjust mode.

ADJ SETTING

CODEMATIC OFF

RTN

For details on the CODEMATIC function, see “Using the security function” (cf. page 51).

Selecting a mode

1.Press the [SRC] button to change the operation mode.

2.Each time you press the [SRC] button, the operation mode changes in the following order:

Radio ➜ (DAB) ➜ CD/MP3 ➜

M. CATCHER ➜ (CD changer) ➜ (DVD changer) ➜ (TV) ➜ AUX ➜ Radio...

∗External equipment not connected with CeNET is not displayed.

Adjusting the volume

1.Turning the [ROTARY] knob clockwise increases the volume; turning it counterclockwise decreases the volume.

∗The volume level is from 0 (minimum) to 33 (maximum).

Switching the operation display mode

There are 2 basic operation displays: standard operation display and simple operation display.

1.Press and hold the [MODE] button for 2 seconds or longer to switch the operation display.

				FM1
SEEK						P.CH
98.10				2:45 CT	P3
	PRESET	BAND	PS/AS	DISP

In the simple operation display, the operations of

touching in the radio or CD mode display screen are not required.

14 DXZ958RMC