When the REG function is ON, the optimum regional station can be received. When this function is OFF, the optimum station for that region is received if the regional station area switches as you drive.
• The factory default setting is “OFF”.
Notes:
•This function is disabled when a national station such as BBC R2 is being received.
When a traffic announcement broadcast starts in the TA standby mode, the traffic announcement broadcast is received as top priority regardless of the function mode so you can listen to it. Traffic programme (TP) automatic tuning is also possible.
•This function can only be used when “TP” is lit in the display. When “TP” is lit, this means that the RDS broadcast station being received has traffic announcement programmes.
English
•The REG function ON/OFF setting is valid when the AF function is ON.
■To switch the REG function ON/OFF
1.Press the [MODE] button.
2.Touch [REG].
“REG” lights in the display.
To switch the REG function OFF, repeat steps 1 and 2.
■To set the TA standby mode
If you press the [TA] button when only “TP” is lit in the display, “TP” and “TA” light in the display, and this unit is set to the TA standby mode until a traffic announcement is broadcast. When a traffic announcement broadcast starts, “TRA INFO” appears in the display. If you press the [TA] button while a traffic announcement broadcast is being received, the traffic announcement broadcast reception is cancelled and this unit enters the TA standby mode.
•This function is valid when the AF function is ON.
•The operation differs according to the ON/ OFF setting of the REG function. When the REG function is ON, broadcasts having a perfectly matching PI code can be received. When the REG function is OFF, broadcasts of the same type of PI code can be received.
Notes:
•This function can be used when a regional broadcast of the same network is received.
•The PI code is a coding system that is unique to each broadcast station.
1.Touch [PRESET].
The preset memory No. list is displayed.
2.Touch the preset memory No. of the broadcast to be received.
■To cancel the TA standby mode
With “TP” and “TA” lit in the display, press the
[TA] button. “TA” in the display goes off and the TA standby mode is cancelled.
•If “TP” is not lit, pressing the [TA] button searches for a TP station.
■To search for a TP station
If you press the [TA] button when “TP” is not lit, “TA” in the display lights and this unit automatically receives a TP station.
Note:
•When a TP station cannot be received, “TP SEEK” is displayed, and the search for the TP station is continued. When the [TA] button is pressed again, “TA” and “TP SEEK” in the display go off, and the search for the TP station ends.
DXZ958RMC 21