Common Operations
This function allows you to set how much the displayed is to be dimmed.
• The factory default setting is “3”.
1.Press the [ADJ] button to set to the adjust mode.
2.Touch [APPEARANCE].
3.Touch on the left of the display to select “DMR LEVEL”.
ADJ APPEARANCE
DMR L E V E L 3
RTN
4.Touchon the right of the display to set the dimmer level.
∗ Select one of OFF (dimming OFF, bright), 1 (slightly dimmed) to 5 (dark).
5.Press the [ADJ] button to return to the original mode.
Adjusting the brightness of the display (BRIGHT)You can adjust the brightness of the display to match the mounting angle of the unit.
•The factory default setting is “5”.
1.Press the [ADJ] button to set to the adjust mode.
2.Touch [APPEARANCE].
3.Touchon the left of the display to select “BRIGHT”.
ADJ APPEARANCE
BRIGHT 5
RTN
4.Touchon the right of the display to adjust the brightness.
∗This setting item can be adjusted within the range 1 to 12.
Adjust this setting item while viewing how the appearance of the display changes.
5.Press the [ADJ] button to return to the original mode.
You can make the LED on this unit blink when the DCP is removed.
• The factory default setting is “OFF”.
1.Press the [ADJ] button to set to the adjust mode.
2.Touch [APPEARANCE].
3.Touchon the left of the display to select “BLINK LED”.
ADJ APPEARANCE
BL INK LED OFF
RTN
4.Touchon the right of the display to select “ON” or “OFF”.
5.Press the [ADJ] button to return to the original mode.
Setting the beep for when buttons are operated (BEEP)The short or long
• The factory default setting is “ON”.
1.Press the [ADJ] button to set to the adjust mode.
2.Touch [APPEARANCE].
3.Touchon the left of the display to select “BEEP”.
ADJ APPEARANCE
BEEP OFF
RTN
4.Touchon the right of the display to select “ON” or “OFF”.
5.Press the [ADJ] button to return to the original mode.
English
DXZ958RMC 47