Sound Adjustment

English

Set the value to “0” to reproduce all center sound from the center speaker.

Set the value to “7” to distribute all center sound to left/right front speakers, just like a normal stereo system.

*“CTR WIDTH” is displayed only when “CENTER-SP” is set to “ON”.

1.Press the [SOUND] button.

2.Touch [Å]/[Î] to go to the next page.

3.Touch [Dolby PL II CONT].

•The items to set are “PANORAMA”, “DIMENSION”, and “CTR WIDTH”.

4.Touch on the left of the display to select the item.

Dolby PL CONT

PANORAMA NO

RTN

5.Touchon the right of the display to adjust the values.

•For “PANORAMA”, select “YES” or “NO”.

•“DIMENSION” can be adjusted within the range 0 to 6.

•“CTR WIDTH” can be adjusted within the range 0 to 7.

6.Press the [SOUND] button to return to the original mode.

Adjusting the rear speaker delay time

Delay time

The time necessary for sound to travel from speakers to a listener differs depending on the speaker location or the car size. By adjusting the delay time of each speaker, you can hear the sound from the front speakers and the other speakers simultaneously.

•This item can be adjusted only when

“SPEAKER SELECT” is set to “Dolby PL II”.

•The factory default setting is “0ms”.

1.Press the [SOUND] button.

2.Touch [Å]/[Î] to go to the next page.

3.Touch [SRD DELAY].

SRD DELAY

SRD SP 0ms

4.Touchingon the right of the display to adjust the delay time.

•“SRD-SP” can be adjusted within the range 0ms to 15ms.

5.Press the [SOUND] button to return to the original mode.

RTN

42 DXZ958RMC