Radio Operations

English

1.Touch [BAND] to select the desired band (FM or AM (MW, LW)).

2.Tune into a station.

∗If "MANU" is displayed, touch and hold [BAND] for 1 second or longer.

Automatic tuning is possible when "SEEK" is displayed.

∗If “TA” is lit in the display, TP stations are automatically sought.

DX SEEK

When is touched on the frequency display, automatic tuning starts.

When is touched, the station is sought in

the direction of higher frequencies; whenis touched, the station is sought in the direction of lower frequencies.

∗When seek tuning starts, “DX SEEK” appears in the display.

LOCAL SEEK

Whenis touched on the frequency display, local seek tuning is carried out. Broadcast stations with good reception sensitivity are selected.

∗When local seek starts, “LO SEEK” appears in the display.

1.Touch [PRESET].

The preset memory No. list is displayed.

2.Touch the preset memory No.

∗In the standard operation display, preset

No. can also be tuned by touching .

■To cancel tuning

1. Touch [RTN].

Preset memory

A total of 24 preset positions (6-FM1, 6-FM2, 6- FM3, 6-AM) exists to store individual radio stations in memory.

1.Touch [BAND] to switch the reception band.

2.Operate the frequency display to tune to a frequency to store.

3.Touch [PRESET].

The preset memory No. list is displayed.

4.Touch and hold the preset No. to store the station to for 2 seconds or longer.

You will hear a long beep, and the station is stored in memory.

Manual tuning

There are 2 ways available: quick tuning and step tuning.

In the step tuning mode, the frequency changes 1 step at a time. In the quick tuning mode, you can quickly tune the desired frequency.

1.Touch and hold [BAND] for 1 second or longer if “SEEK” is displayed.

Manual tuning is possible when “MANU” is displayed.

2.Operate the frequency display to tune to a frequency on which there is a broadcast.

●Step tuning

Touchon the frequency display.

●Quick tuning

Touchon the frequency display. Tuning stops when you take your finger away from the panel.

Recalling a preset station

Recalling a preset station is a function for tuning pre-stored stations.

Auto store

Auto store is a function for storing up to 6 stations that are automatically tuned in sequentially.

1.Touch and hold [PS/AS] for 2 seconds or longer.

“A-STORE” is displayed.

∗Stations with good reception are automatically searched, and are stored to preset memory (No.1 to No.6) in order from the station having the lowest frequency.

Notes:

•When auto store is performed, stations stored to memory so far are cleared.

•When there are fewer than 6 stations with good reception in LOCAL SEEK, low frequencies are automatically returned to, and auto store is performed again by DX SEEK. If there are fewer than 6 stations even after auto store is performed twice, stations stored so far remain in memory.

•If auto store is performed in the FM bands, the stations are stored in FM3 even if FM1 or FM2 was chosen for storing stations.

18 DXZ958RMC