Sound Adjustment

English

Notes:

•The screen displayed in step 3 appears, with the title being accompanied by “✓” mark.

Operation so far completes P.EQ adjustment. To continue to store the adjustment value to the P.EQ user menu, perform the following.

12.Touch [PRESET] to display the P.EQ menu list.

13.Touch and hold [USER] for 2 seconds or longer.

You will hear a long beep, and the values you adjusted up to step 10 are stored to the P.EQ menu.

If you hear a short beep, the adjustment values up to step 10 are discarded. Adjust these values again as required.

14.Press the [SOUND] button to return to the original mode.

Dolby Pro Logic II

Dolby Pro Logic II is a matrix decoding technology in which updated digital matrix technology is applied and Dolby Pro Logic is further improved. Dolby Pro Logic II realizes excellent 5.1 channel reproduction of Dolby surround source as well as stereo sound sources such as CDs, thereby causing a surround channel to be full-ranged (20 Hz to 20 kHz) and become stereo. Therefore, you can enjoy any stereo sources with dynamic sound of

5.1channel. The Music Mode or Matrix Mode can be selected according to a source to be reproduced.

This product is manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic” and the double-D symbol are trademarks of Dolby Laboratories.

Selecting the PL II menu (Dolby PL II)

This is available only when the speaker system is set to “Dolby PL II”.

Select the MUSIC mode or the MATRIX mode matched the source you are to play as the Dolby Pro Logic II mode.

• The factory default setting is “MUSIC”.

■MUSIC (music mode)

•This mode is suited for stereo sound sources such as CDs.

•Another adjustment mode (PL II CONT) that enables more detailed adjustment is also available because the sound field spreads differently depending on the state of the recorded music source. (See page 41)

■MATRIX (matrix mode)

•This mode is suited for sound sources such as AM/FM radio.

1.Press the [SOUND] button.

2.Touch [Dolby PL II].

 

 

SOUND 1 2

 

ADF

Dolby

SP

FILTER BALANCE

FADER

PL

GAIN

 

 

 

OFF

MUSIC

 

0

0

RTN

The mode display is switched as follows:

MUSIC (music mode) ➜ MATRIX (matrix

mode) ➜ MUSIC (music mode)...

3.Press the [SOUND] button to return to the original mode.

*For details on the volume adjustment of the center speaker/sub-woofer, see page 36.

Adjusting the speaker gain level

Use the built-in test tone function so that the gain levels from all speakers become equal.

•The SP GAIN menu can be adjusted only when the Pro Logic II mode is set to “MUSIC” or “MATRIX”.

•The factory default setting is “0dB”.

1.Press the [SOUND] button.

2.Touch [SP GAIN].

SP GAIN MODE

FRONT - L 0dB

RTN

3.Touch on the left of the display to select an item.

Each touch switches the adjustment item as follows:

40 DXZ958RMC