Common Operations

English

3.Touch on the left of the display to select “TEL-SP”.

ADJ SETTING

TEL-SP RIGHT

RTN

4.Touch on the right of the display to select “LEFT” or “RIGHT”.

LEFT:

Telephone calls can be heard on the front left speaker connected to this unit.

RIGHT:

Telephone calls can be heard on the front right speaker connected to this unit.

5.Press the [ADJ] button to return to the original mode.

Cellular phone interrupt setting

If you connect this unit and your cellular phone with a unit (Optional, TEL-002), you can listen to your telephone calls on your car speakers.

• The factory default setting is “OFF”.

1.Press the [ADJ] button to set to the adjust mode.

2.Touch [SETTING].

3.Touch on the left of the display to select “TEL-SWITCH”.

ADJ SETTING

TEL-SWITCH OFF

RTN

4.Touch on the right of the display. Each time you touch, the setting changes in the following order:

OFF ➜ ON ➜ MUTE ➜ OFF...

OFF:

This unit continues normal operation even when the cellular phone is used.

Note:

•When connecting a hands-free kit, make sure that the setting is ON to receive the telephone audio through the system.

ON:

You can listen to your telephone calls from the speakers connected to this unit.

∗When listening to your calls on your car speakers, you can adjust the volume by turning the [ROTARY] knob.

MUTE:

The sound from this unit is muted during telephone calls.

5.Press the [ADJ] button to return to the original mode.

Setting the auto-volume function (CALIBRATE/A-VOL SENS)

You can automatically change the volume to match your car's speed.

• The factory default setting is “LOW”.

1.Press the [ADJ] button to set to the adjust mode.

2.Touch [SETTING].

3.Touch on the left of the display to select “CALIBRATE”.

ADJ SETTING

CALIBRATE[START]

RTN

4.Accelerate to a speed of 50 km.

5.When you reach 50 km, touch [START]. Calibration is executed.

After 2 seconds or longer, you will hear a long beep, and “SUCCESSFUL” will appear on the display.

If you hear a short beep, this indicates that calibration failed. Repeat the procedure from step 4.

6.Next, adjust the sensitivity. Touch [SETTING].

7.Touchon the left of the display to select “A-VOL SENS”.

ADJ SETTING

A-VOL SENS LOW

RTN

8.Touchon the right of the display. Each time you touch, the setting changes in the following order:

OFF (no change in volume) ➜ LOW (change in volume: small) ➜ MID-LOW➜ MID ➜ MID-HIGH➜ HIGH (change in volume: large) ...

9.Press the [ADJ] button to return to the original mode.

50 DXZ958RMC