RDS Operations
English
You can automatically store up to 6 TP stations to preset memory. If the number of TPs that can be received is less than 6, broadcast stations already stored in memory are left without being overwritten.
1.Make sure that “TA” is displayed.
If “TA” is not displayed, press the [TA] button to display “TA”.
2.Touch and hold [PS/AS] for 2 seconds or longer.
•TP stations with good reception sensitivity are stored to preset memory.
•Even if you select FM1 or FM2, a TP station is stored to memory for FM3.
1.Press the [MODE] button.
2.Touch [PTY SELECT].
3.Touch on the right of the display to select PTY.
∗Below are the factory default settings stored:
Preset |
| PTY item | |
number | ENGLISH |
| Contents |
P1 | News |
| News |
P2 | Info |
| Information |
P3 | Pop M |
| Pop Music |
P4 | Sport |
| Sport |
P5 | Classics |
| Serious Classical Music |
P6 | Easy M |
| Easy Listening Music |
|
|
|
|
4.The PTY select mode is cancelled automatically 7 seconds after, or touch [RTN].
PTY
This function enables you to listen to a broadcast of the selected programme type even if this unit is in a function mode other than radio.
•The factory default setting is “OFF”.
•Some countries do not yet have PTY broadcast.
•In the TA standby mode, a TP station has priority over a PTY broadcast station.
■To set the PTY standby mode
1.Press the [MODE] button.
2.Touch [PTY].
“PTY” lights in the display and the PTY standby mode is turned on.
When the selected PTY broadcast starts, the PTY item name appears in the display.
1.Press the [MODE] button.
2.Touch [PTY SELECT].
3.Either touchon the right of the display, or touch
4.Touchon the left of the display.
Whenis touched, this unit seeks a PTY broadcast moving up the frequencies, while
whenis touched it seeks moving down the frequencies.
∗If no station with the selected PTY broadcast can be received, this unit returns to the previous mode.
■To cancel the PTY standby mode
1.Press the [MODE] button.
2.Touch [PTY].
“PTY” goes off in the display and the PTY standby mode is cancelled.
■To cancel a PTY interrupt broadcast
Press the [TA] button during the PTY interrupt broadcast. The PTY interrupt broadcast is cancelled and this unit returns to the PTY standby mode.
22 DXZ958RMC