English
1.Press the [SRC] button to select the DAB mode.
2.Touch [BAND].
Each touch of [BAND] changes the display in the following order:
Notes:
•If a TP station is not received, the main unit stops the search operation.
•“TP” may be lit in the display when a TP broadcast is transmitted from an RDS station. In this case, press the [TA] button to perform TP seek tuning. Press the [TA] button again to return to the previous mode.
M1 ➜ M2 ➜ M3 ➜ M1...
3.Touch 
on the right of the display to recall a preset programme.
AF function
The AF function switches to a different frequency on the same network in order to maintain optimum reception.
•The factory default setting is “ON”.
•If the reception of the current broadcast station deteriorates, “SEARCH” appears in the display and the radio searches for the same programme on another frequency.
•For details on the “AF function”(cf. page 20) , refer to the section “RDS operation” of the respective owner's manual.
●To switch the AF function ON
●To switch the AF function OFF
●AF function between RDS and DAB When the same programme is broadcast by both RDS and DAB, and this function is ON, the main unit automatically switches to receive the broadcast with the better reception.
TA (Traffic Announcement)
When a traffic announcement broadcast starts in the TA standby mode, the traffic announcement broadcast is received as top priority regardless of the function mode. Traffic programme (TP) automatic tuning is also possible.
•This function can only be used when “TP” is lit in the display. When “TP” is lit, this means that the DAB or RDS broadcast station being received has traffic announcement programmes.
•For details on “TA” (cf. page 21), refer to the section “RDS operation” of the respective owner's manual.
●To set the TA standby mode
●To cancel the TA standby mode
●To search for a TP station
In the INFO standby mode, when the selected announcement programme starts, the main unit automatically switches to the selected announcement programme.
●To set the INFO standby mode
If you press and hold the [TA] button for 1 second or longer, “INFO” lights in the display and the main unit is set to the INFO standby mode until the selected announcement is broadcast.
When the selected announcement broadcast starts, the announcement item appears in the display. If you press and hold the [TA] button for 1 second or longer while the selected announcement broadcast is being received, reception of the selected announcement broadcast is cancelled and the main unit enters the INFO standby mode.
●To cancel the INFO standby mode
To cancel the INFO standby mode, press and hold the [TA] button for 1 second or longer.
●Information select
This is a function for selecting INFORMATION ON or OFF in the Information interrupt mode.
You can set ON for up to 6 information items.
You can select any of the 6 items below:
| INFORMATION item | |
ENGLISH |
| Contents |
Travel |
| Transport flash |
Warning |
| Warning / Service |
News |
| News flash |
Weather |
| Area weather flash |
Event |
| Event announcement |
Special |
| Special event |
60 DXZ958RMC