Common Operations
English
This function allows you to display a message on the display when no operation is performed for more than 30 seconds.
• The factory default setting is “OFF”.
1.Press the [ADJ] button to set to the adjust mode.
2.Touch [APPEARANCE].
3.Touch on the left of the display to select "MSG INFO".
6.Touch on [FONT] to select the type of
text.
Each touch ofswitches the type of text. For details, see page 43.
7.Touchon [TEXT] to determine the character to enter.
8.Repeat steps 5 to 7 to enter the message.
9.Touch [MEMO].
You will hear a long beep, and the message is stored in memory.
10.Press the [ADJ] button to return to the original mode.
ADJ APPEARANCE
MSG I N F O OFF | Setting the |
| |
RTN | (DIMMER IN) |
|
4.Touchon the right of the display to select “ON” or “OFF”.
5.Press the [ADJ] button to return to the original mode.
Entering messages to display in message information (MSGINPUT)•Up to 30 characters can be entered.
•The factory default setting is “Active MatriX Control System”.
1.Press the [ADJ] button to set to the adjust mode.
2.Touch [APPEARANCE].
3.Touchon the left of the display to select "MSG INPUT".
MSG INPUT | [ENT] |
RTN
4.Touch [ENT].
The mode changes to the message entry mode.
5. Touch [ ]/[ | ] to determine the entry |
|
|
| ||||||
position. |
|
|
|
|
| |||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| MESSAGE INPUT |
|
|
|
|
|
|
|
|
|
| Active Mat |
|
|
|
|
| A |
|
|
|
| ||||
|
|
|
|
|
|
|
|
|
| |
|
| FONT |
| MEMO |
| RTN | TEXT | |||
|
|
|
|
|
|
|
|
This function allows you to dim the lighting of the display matched to the illumination or the brightness inside your car.
Select either “AUTO” (interlocked to the brightness inside your car) or “ILLUMI” (interlocked to the illumination inside your car) as the
•When the
•Set the dimmer setting at DMR LEVEL.
•The factory default setting is “AUTO”.
1.Press the [ADJ] button to set to the adjust mode.
2.Touch [APPEARANCE].
3.Touchon the left of the display to select “DIMMER IN”.
ADJ APPEARANCE
D I MMER I N AUTO
RTN
4.Touchon the right of the display to select “AUTO” or “ILLUMI”.
5.Press the [ADJ] button to return to the original mode.
46 DXZ958RMC