|
| Common Operations |
Setting internal amplifier use | 4. Touch | on the right of the display to |
ON/OFF (AMP CANCEL) | select “AUX” or “TEL”. | |
AUX: | ||
|
English
Set internal amplifier use ON/OFF matched to whether or not an external amplifier is used.
Set AMP CANCEL to “ON” (internal amplifier use OFF) when an external amplifier is connected and the internal amplifier is not used.
•The factory default setting is “OFF” (internal amplifier used).
1.Press the [ADJ] button to set to the adjust mode.
2.Touch [SOUND].
3.Touch on the left of the display to select “AMP CANCEL”.
ADJ SOUND
AMP CANCEL OFF
RTN
4.Touchon the right of the display to select “ON” or “OFF”.
5.Press the [ADJ] button to return to the original mode.
The AUX/TEL input cable is for external Audio input.
TEL:
The AUX/TEL input cable is for cellular phone audio input.
5.Press the [ADJ] button to return to the original mode.
Setting the input level (AUX SENS) of portable audio (AUX mode)This function allows you to set the input level of optional external devices connected to this unit.
• The factory default setting is “MID”.
1.Press the [ADJ] button to set to the adjust mode.
2.Touch [SETTING].
3.Touchon the left of the display to select "AUX SENS".
This system has an external RCA input so you can listen to sounds and music from external devices connected to this unit.
ADJ SETTING
AUX SENS MID
RTN
4.Touchon the right of the display to set the input level.
∗ Select LOW, MID or HIGH.
You can listen to sound and music from external devices, or your telephone calls from the speakers when connected to this unit.
When TEL INT or External device is connected to this unit, you can select the TEL mode or AUX mode.
Notes:
•When the input level is overloaded, “OVERLOAD” appears. Adjust AUX SENS or the input level so that “OVERLOAD” disappears.
5.Press the [ADJ] button to return to the original mode.
•The factory default setting is “AUX”.
1.Press the [ADJ] button to set to the adjust mode.
2.Touch [SETTING].
3.Touchon the left of the display to
select “AUX/TEL”.
ADJ SETTING
AUX/TEL AUX
RTN
•To output telephone calls, set the cellular phone.
•The factory default setting is “RIGHT”.
1.Press the [ADJ] button to set to the adjust mode.
2.Touch [SETTING].
DXZ958RMC 49