Cleveland Range 22CET3.1, 22CET6.1

Figure 3

Electrical Connections

K. Electric Power Supply

• The electric supply must match all electrical and wiring requirements specified on the rating plate.

• NOTE: This appliance is NOT Ground Fault Interrupter (GFI or GFCI) compatible.

• The Electrical Diagram is located on the back of the control-side cover.

The connection must be made as follows:

1. Install a main disconnect switch and a separate fuse or breaker for this appliance as shown in

Figure 3-12. The fused disconnect switch is called the “Main External Power Switc h.”

2. Do not use a GFI (GFCI) circuit. This app liance is not GFI compatible.

3. Do NOT use a power cord .

4. Make the electrical connect ion using flexible conduit, per local code.

5. There should be a sufficient length of flexible conduit between the steamer and the wall so the

appliance can be moved for service.

6. Mechanically secure the flex ible conduit to the electrical access hole found at the rear of the

appliance. See Figure 3-13.

7. Refer to the wiring diagram s and Figure 3-14. Connect the wires to the terminal block and ground

connector.

8. The appliance must be electr ically grounded by the installer.

Figure 3

Electrical Layout

GROUND

LUG

TERMINAL

BLOCK

WIRING

INLET

Figure 3

Electrical Connection Inlet

This appliance is not GFI (GFCI) compatible.

Do not use a GFI (GFCI) circuit.

Using a GFI (GFCI) circuit can result in injury, equipment damage, and property damage.

ELECTRICAL

INLET