4.CH 3 /DOWN - While in Quad mode, press this button momentarily (at least 3 seconds) and channel 3 will appear in full screen.
-In full screen mode, channel 3 single screen or on PIP / POP / QUAD screen, press this button once and the screen will freeze. Press this button again to release the frozen picture.
-On Playback mode, pressing this button will show the channel 3 single screen.
-On SETUP / SEARCH / PTZ / RECORD LISTS mode, this button can be used as ARROW ( LEFT ) button.
-On PASSWORD input mode, pressing this works as number 3.
5.CH 4 /RIGHT - While in Quad mode, press this button momentarily (at least 3 seconds) and channel 4 will appear in full screen.
-In full screen mode channel 4 single screen or on PIP / POP / QUAD screen, press this button once and the screen will freeze. Press this button again to release the frozen picture.
-On Playback mode, pressing this button will show the channel 4 single screen.
-On SETUP / SEARCH / PTZ / RECORD LISTS mode, this button can be used as ARROW ( LEFT ) button.
-On PASSWORD input mode, pressing this works as number 4.
6.QUAD /ENTER - Press this button in LIVE mode, the monitor should display QUAD screen.
-On SETUP / PTZ mode, pressing this button can select item or change the values.
-On SEARCH / RECORD LISTS mode, pressing this button will playback the selected data.
-Press this button on Playback Zoom mode and channel will change in sequence whenever the button is pressed.
7.AUTO / ZOOM - Press this button in LIVE mode, the monitor displays QUAD screen and a full screen at a time in a continuous sequence – one camera after another.
-If the channel (s) has no video signal or channel that is set up dwell time to 0 second, the corresponding channel (s) will be skipped in sequential mode.
-The image on the screen will be zoomed up to 2 times when this button is pressed in the Playack mode(Full screen or Quad screen).
While replaying, press Auto/Zoom button (available on firmware ver.# CL042706(S) or later version) to zoom in, and the Zoom OSD will be shown on the screen.
-Repeatedly pressing the ENTER button, the corresponding channel will be displayed.
-Press Auto/Zoom button again to exit Zoom mode.
| 8. POP | - Displays one main screen and 3 sub screens. |
|
| 9. PIP | - Displays one full screen and one or two sub screens on the full screen. |
|
|
|
|
|
- 06 -
