Clover Electronics CDR 4170 instruction manual Quad Button, Auto Button, Pop, Setup

10. QUAD BUTTON

•Click the Quad button to display the quadrant pictures.

11. AUTO BUTTON

•The GUI will be viewed a full screen at a time in a continuous sequence (one camera after another) by clicking this button.

•The dwell time can be set from 1 to 10 seconds in the SETUP menu on the GUI.

•The sequencing order: CH1->CH2->CH3->CH4->QUAD.

12. POP

•It stands for Picture of Picture.

•Click the POP button, and it will be displayed a medium screen and 3 small screens.

13.PIP

•It stands for Picture In picture.

•Click the PIP button, and it will be displayed 3 PIPs on a full screen.

14.SETUP

Click the SETUP button on the GUI, and it will be appeared the following window that can change the values in regards to DVR.

•Time/Date: Shows the current time on the computer. After changing the values, press the Update Time/Date button on the right side to save the values. This function does not affect the DVR.

•REC. Quality: Shows the REC Quality values on the DVR. Change the values on the window and press the Update REC.Quality button to save them. You can change the values on the DVR related to the Continuous Recording and Alarm Recording.

•REC. Speed: Shows the REC Speed values on the DVR. Change the values on the window and press the Update REC. Speed button to save them. You can change the values on the DVR related to the Continuous Recording and Alarm Recording.

•REC. Resolution: Shows the REC Resolution values on the DVR. Change the values

- 50 -