Select Channel
Reset button
7.PRINT
•Click the PRINT button to print the current pictures shown on the GUI and then the following window pops up along with “WAIT…”. Please wait a couple of seconds until the system loads data to print.
8.REC
•Click the REC button to start or stop recording. User can switch ON or OFF recording from a remote location through the network when the DVR is in the recording mode.
•When the system is in the recording mode, the button will turn red in color.
•If not recording, the button turns green in color.
9.CHANNEL SELECTION BUTTONS
•You can see a channel in full screen by clicking one of the channel selection buttons.
-49 -
