Code Alarm CR3 manual Reader Battery Installation, Attaching and Detaching the Lithium Ion Battery

1.13 - Reader Battery Installation

Attaching and Detaching the Lithium Ion Battery

The CR3 can be purchased with a 1950 mAH Lithium Ion battery. To install battery, make sure the battery is in the correct position (fi gure 1.21). Place the plastic tab of the battery into the reader (fi gure 1.22). Push the battery in and slide the locking mechanism down (fi gures 1.23 & 1.24)

Charging the Lithium Ion Battery

The battery automatically charges everytime a cable inteface is attached to the unit and the host is powered up.

Note: The RS232 interface power adapter must be plugged into a wall socket for the unit to charge.

If you power-up the CR3 with a completely discharged battery it will take up to 10 minutes before the unit will become operational.

Figure 1.21

Figure 1.22

Figure 1.23 Figure 1.24

Save Settings C002332_09_CR3 User Manual - 23