Code Alarm manual CR3 Programming Symbology Settings, Reader Feedback and Special Settings

2.10			- Continuous Scan	30
2.11			- Continuous Scan Settings	31
			2.11.1 - Continuous Scan - Sleep Time Out	31
			2.11.2 - Continuous Scan - Trigger Delays	31
			2.11.3 - Continuous Scan - Duplicate Scan Delay	31
2.12			- Motion Detection Scan Settings	31
Chapter 3 - CR3 Programming: Symbology Settings				32
3.1		- Introduction		33
3.2		- Aztec Symbology		33
3.3		- Codabar Symbology		33
3.4		- Codablock F Symbology		34
3.5		- Code 11 Symbology		34
3.6		- Code 39 Symbology		34
3.7		- Code 93 Symbology		35
3.8		- Code 128 Symbology		35
3.9		- Composite Symbologies		36
3.10			- Data Matrix Symbology	36
	3.11 - GoCode Symbology			36
3.12			- Interleaved 2 of 5 Symbology	37
3.13			- Maxicode Symbology	37
3.14			- Matrix 2 of 5 Symbology	38
3.15			- Micro PDF417 Symbology	38
3.16			- MSI Plessy Symbology	38
3.17			- NEC 2 of 5 Symbology	39
3.18			- PDF 417 Symbology	39
3.19			- Pharmacode	40
3.20			- Postal Symbologies	40
3.21			- QR Code Symbology	41
3.22			- RSS Symbology	41
3.23			- Telepen Symbology	42
3.24			- UPC/EAN/JAN	42
Chapter 4 - Reader Feedback and Special Settings				43
4.1		- Volume and Vibration Settings		44
4.2		- Code Readability Index		44
4.3		- Backlight Intensity Settings		45
4.4		- Backlight Timeout Settings		46
4.5		- Laser Settings		46
4.6		- Reader Power Off Settings		46
4.7		- Reader ID and Firmware Version		47
4.8		- Reader Settings Lock		47
4.9		- Keyboard Support		48
	4.10		- Timestamp Settings	48

Save Settings C002332_09_CR3 User Manual - iv