4.4 - Backlight Timeout Settings
Scan the following codes to set the backlight settings:
Backlight Off | 3 seconds (Default) | 6 seconds | 10 seconds |
4.5 - Laser Settings
Scan the following codes to turn laser targeting on/off:
On (Default) | Off |
Scan one of the following codes to set the brightness of the CR3 laser.
High (Default) | Medium | Low |
4.6 - Reader Power Off Settings
Scan the following codes to set the amount of time before a reader powers off:
1 Hour | 2 Hours - Default | 4 Hours |
Press and hold any red trigger on the reader (for three seconds) to power on a unit.
Save Settings | C002332_09_CR3 User Manual - 46 |
