Code Alarm CR3 manual Reset Reader to Factory Defaults, General Safety Information

7.1 - Reset Reader to Factory Defaults

Scan the following codes to reset reader:

Reset to USB Factory	Reset to PS/2 Factory	Reset to RS232 Factory
Default Settings	Default Settings	Default Settings

Radio settings will not be reset with this code.

Reset to RF One Way Factory Default Settings

Radio settings will	Radio settings will
not be reset with	not be reset with
this code.	this code.

Bootloader Mode

Bootloader mode is utilized to download new version of bootloader

firmware and custom applications.

Clear All CodeXML Rules	Clear All Stored Data	Save Settings
Prefix & Suffix

Note: If you scan these codes, you may lose your current settings. Make sure to save settings on your reader before scanning the above codes.

7.2 - General Safety Information

Repairs and Adjustments - Only those individuals authorized by Code should attempt to make repairs or adjustments to CR3 equipment. If the reader casing is opened the warranty is voided.

Power Supply - Use only the power supply provided for use with each specifi c unit when operating Code equipment.

Accessories - Only those accessories approved by Code (see pg. 9) should be utilized with Code equipment. Non-compliance with any of the above may result in:

•Injury to individuals handling the equipment;

•Damage to the equipment; and

•Voiding of the maintenance contract.

Lasers - The CR3 utilizes a laser FOR TARGETING PURPOSES ONLY. If the laser is activated, do not stare into the beam. See pg. i for further information regarding laser warnings.

Save Settings C002332_09_CR3 User Manual - 59