Compaq N110 manual Disconnect the fan cable from the system board, 22 Removing the Fan, 5-37

Models: N110 110

1 153
Download 153 pages 63.29 Kb
Page 105
Image 105
3.Disconnect the fan cable from the system board 2.

Removal and Replacement Procedures

2.Remove the two M2.5 × 4.5 screws 1 securing the fan bracket and fan to the system board (Figure 5-22).

3.Disconnect the fan cable from the system board 2.

4.Remove the fan bracket 3 and fan 4 from the base enclosure.

Figure 5–22: Removing the Fan

Reverse the above procedure to install the fan.

Maintenance and Service Guide

5–37

Page 105
Image 105
Compaq N110 Disconnect the fan cable from the system board, Remove the fan bracket 3 and fan 4 from the base enclosure