Compaq N110 manual Remove the hard drive bracket 2 from the base enclosure

Models: N110 110

1 153
Download 153 pages 63.29 Kb
Page 101
Image 101
3.Remove the hard drive bracket 2 from the base enclosure.

Removal and Replacement Procedures

2.Remove the three M2.5 × 5.5 screws 1 securing the hard drive and hard drive bracket to the base enclosure (Figure 5-20).

3.Remove the hard drive bracket 2 from the base enclosure.

4.Slide the hard drive toward the front of the base enclosure 3 to disconnect it from the system board.

5.Remove the hard drive from the base enclosure 4.

Figure 5–20: Removing the Hard Drive

Reverse the above procedure to install the hard drive.

Maintenance and Service Guide

5–33

Page 101
Image 101
Compaq N110 manual Remove the hard drive bracket 2 from the base enclosure