Compaq HB1004 manual Modem Connection

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3-2Setup and Configuration

Figure 3-1. Out-of-Band Connection Using an Onsite PC

Modem Connection

Connect the COM port on the hub to the serial port on the modem. Use the communications cable provided with the hub and DB9/25 to RJ-45 converters as needed. At the remote site, connect the PC’s COM port to the remote modem. Configure the PC’s COM port and the modems for 9600 baud, 8 bits, no parity, and one stop bit (9600, 8, N, 1). See Figure 3-2.

Figure 3-2. Out-of-Band Connection Using a Remote PC and Modem